Search results for "activated carbon"
showing 10 items of 70 documents
Activated Carbon from Renewable Sources: Thermochemical Conversion and Activation of Biomass and Carbon Residues from Biomass Gasification
2017
Activated carbon is one of the most widely applied adsorbent. As a porous carbon, it is used for the purification of both gaseous and liquid emissions. Activated carbon is prepared from fossil resources, such as coal, or from biomass through (hydro)thermal processing followed by chemical and/or physical activation. Further, some biomass thermal treatment processes, such as biomass gasification, produce carbon residues that can be modified to activated carbon with physical or chemical activation methods. The desired properties of activated carbon, i.e. high specific surface area and porosity, high carbon content and excellent sorption capacity, can be modified and optimized during thermochem…
Interspecies interactions mediated by conductive minerals in the sediments of the iron rich meromictic Lake La Cruz, Spain
2019
espanolLa laguna de La Cruz puede considerarse como un analogo biogeoquimico de los ambientes marinos en la Tierra primitiva, porque su columna de agua, muy escasa en sulfato pero rica en metano y hierro, presenta condiciones similares a estos ambientes en el Precambrico. En este ambiente encontramos que particulas conductivas establecen un acoplamiento metabolico entre clados microbianos electroactivos. Demostraremos que el sedimento anoxico de la laguna de La Cruz, rico en minerales de hierro biogeoquimicamente “reactivos”, alberga conocidas especies electroactivas tales como Geobacter y Methanothrix, ademas de otros grupos microbianos que no han sido previamente asociados con un estilo d…
Sewage sludge as cheap alternative to microalgae as feedstock of catalytic hydrothermal liquefaction processes
2019
Abstract Production of biocrude through hydrothermal liquefaction (HTL) of sewage sludge (SS) and Chlorella vulgaris was investigated. NiMo/Al2O3 (KF 851), CoMo/Al2O3 (KF 1022) and activated carbon felt, tested as catalysts at 598 K for 30 min, did not change the biocrude yield but significantly improved its quality. Quantitative sulfur removal and lower oxygen content were found in biocrude when KF 851 and KF 1022 were used with C. vulgaris. The same catalysts decreased O/C and S/C ratio of the biocrude from SS. The highest HHV (38.19 MJ/kg) and H/C ratio (1.65) and the lowest O/C (0.11) of the biocrude from SS were obtained with the cheaper activated carbon felt. A new product phase, prob…
Sustainable Construction of Heterocyclic 1,2,3-Triazoles by Strict Click [3+2] Cycloaddition Reactions Between Azides and Alkynes on Copper/Carbon in…
2019
1,4-Disubstituted-1,2,3-triazoles, considered as an important and useful class of heterocycles with potential applications in material science and biology, have been prepared in an efficient and selective manner by copper on carbon-catalyzed [3+2] cycloaddition reactions of azides and alkynes (CuAAC) in water under strict click chemistry conditions. Copper(I) catalysts heterogenized onto commercially activated carbon materials (Cu-CC) and on another carbon material produced from vegetable biomass using Argan nut shells (Cu-CANS) were found to be versatile catalytic sources for sustainable CuAAC. These copper on carbon supports were prepared and fully characterized by using two types of acti…
Catalytic conversion of glucose to 5-hydroxymethylfurfural over biomass-based activated carbon catalyst
2020
Selective and efficient dehydration of glucose to 5-hydroxymethylfurfural (HMF) has been widely explored research problem recently, especially from the perspective of more sustainable heterogeneous catalysts. In this study, activated carbon was first produced from a lignocellulosic waste material, birch sawdust. Novel heterogeneous catalysts were then prepared from activated carbon by adding Lewis or Brønsted acid sites on the carbon surface. Prepared catalysts were used to convert glucose to HMF in biphasic water:THF system at 160 °C. The highest HMF yield and selectivity, 51% and 78%, respectively, were obtained in 8 h with a catalytic mixture containing both Lewis and Brønsted acid sites…
Study of Ni, Pt, and Ru Catalysts on Wood-based Activated Carbon Supports and their Activity in Furfural Conversion to 2-Methylfuran
2018
Bio‐based chemicals can be produced from furfural through hydrotreatment. In this study, 2‐methylfuran (MF), a potential biofuel component, was produced with Pt, Ru, and Ni catalysts supported on wood‐based activated carbons. The catalytic hydrotreatment experiments were conducted in a batch reactor at 210–240 °C with 2‐propanol as solvent and 40 bar H2 pressure. Two types of activated carbon supports were prepared by carbonization and activation of lignocellulosic biomass (forest‐residue‐based birch and spruce from Finland). Both types of activated carbons were suitable as catalyst supports, giving up to 100 % furfural conversions. The most important factors affecting the MF yield were the…
Combination of different advanced oxidation processes and activated carbons for treatment of salt water
2015
Bilgewater is a corrosive polluted effluent from the bilge of ships that mainly originates from seawater infiltration and leakage of engine oil and fuel. Each year, thousands tons of hydrocarbons from bilge are discharged at sea. In order to prevent hydrocarbon discharge at sea from the bilge of ships, the Internation Maritime Organization (IMO) enacted the MARPOL 73/78 convention in which effluents are now limited to those with maximun oil content of 15 ppmv.
Selection and characterization of adsorbents for the analysis of an explosive-related molecule traces in the air
2013
International audience; This study is focused on the development of a 3D micro-preconcentrator for a sensitive analysis of an explosive-related compound: orthonitrotoluene (ONT). A set of potentially efficient adsorbents for the pre-concentration of ONT was investigated here. An in-depth characterization of their textural properties was carried out in order to better understand their adsorption behavior toward the target analyte. More particularly, this study allowed highlighting the interesting adsorption features of a hydrophobic zeolite and a porous activated carbon in relation to their preconcentration performances toward ONT at the ppb level. Moreover, we found a difference in the adso…
Evaluation of biosorbents for Cu removal from wastewater in the presence of EDTA
2007
BACKGROUND: This paper evaluates the use of several biosorbents for Cu removal from aqueous solutions in the absence and presence of ethylenediaminetetraacetic acid (EDTA). The objective was to determine the applicability of the sorption process after conventional physicochemical wastewater treatment, or as primary treatment, replacing the physicochemical process. RESULTS: Fixed-bed experiments were performed at Cu influent concentrations of 2 and 20 mg dm−3 and EDTA doses between 0 and 10 mg dm−3. At low Cu concentration without EDTA, Cu uptake capacity followed the order Posidonia oceanica > chitosan > chitin > Scharlau AC > Darco AC, with a maximum, at C/C0 = 0.2, of 23.2 mg g−1. In the …
Fixed‐Bed Removal of Free and Complexed Ni from Synthetic and Industrial Aqueous Solutions
2008
Abstract This paper evaluates the application of several biosorbents for Ni removal from aqueous solutions in the absence and in the presence of EDTA. Fixed bed experiments were performed (Ni influent concentration, 2 mg dm−3; EDTA doses, 0, 5, and 10 mg dm−3; pH=7) to study the process feasibility as refining after conventional physicochemical treatment. In absence of EDTA, uptake capacity followed the order peat > Posidonia oceanica > chitosan > chitin ≫ Scharlau AC. Maximum uptakes of 8.95 mg g−1 and 5.10 mg g−1 were found for peat and Posidonia oceanica, respectively. In the presence of EDTA, removal capacity decreased for all biosorbents; Ni was detected in the effluent from the beginn…